English
Español
tiếng việt
русский
High-consistency, two-part addition-cure silicone rubber with excellent processability in compression and transfer molding.
Outstanding thermal stability across a wide service temperature range (–60 °C to +200 °C continuous).
Low compression set and superior resilience for long-term sealing and dynamic gasket performance.
Excellent electrical insulation properties and resistance to moisture, ozone, and UV exposure.
Meets UL 94 V-0 flammability rating and complies with FDA 21 CFR 177.2600 for food-contact applications.
Automotive under-hood components including sensor housings, ignition boots, and thermal management seals.
Medical device parts such as pump diaphragms, respiratory masks, and fluid-handling tubing connectors.
Consumer electronics encapsulation and protective gaskets for wearables and portable devices.
Industrial sealing solutions for HVAC systems, power supplies, and LED lighting housings.
Food and beverage processing equipment gaskets and sanitary interface components.
| Chemical Type | Platinum-catalyzed addition-cure silicone rubber |
| Product Form | Two-part liquid system (Part A: base; Part B: catalyst) |
| Appearance | Pale translucent to off-white viscous paste (Part A); colorless to pale yellow liquid (Part B) |
| Shore A Hardness (Cured, 7 days @ 23 °C) | 50 ± 3 |
| Tensile Strength (ASTM D412) | 8.5 MPa minimum |
| Elongation at Break (ASTM D412) | 450% minimum |
| Volume Resistivity (ASTM D257) | ≥1 × 10¹⁴ Ω·cm |
| Curing System | Addition cure (inhibitor-controlled, heat-activated) |
Contact With Us:
E-mail: wangxingqiang@ericwchem.com
Have a Questions? Call Us:
Add:
Building A1, Jiete Industrial Park, Huangpu District, Guangzhou City, Guangdong Province, China
