English
Español
tiếng việt
русский
In coatings and printing-ink formulation, the selection of a defoamer can directly affect application performance, surface appearance, and production efficiency.
TEGO® Foamex 810 is a selected product in the Evonik TEGO® additive portfolio. It is considered for coating and ink systems where foam control, surface appearance, leveling, and formulation stability are important.
When formulators search for “where to buy TEGO 810,” they are usually looking for more than a product listing. They also need:
Reliable product origin
Stable batch quality
Technical selection support
Flexible order quantities
Clear documentation
Predictable delivery
Related additives from one supply channel
Guangzhou Eric Wei Chemical Co., Ltd. (ERICW) supplies selected TEGO® products and related specialty chemical materials through a combination of branded-product sourcing, technical support, and supply-chain coordination.
Foam may be introduced during mixing, grinding, filling, pumping, or application. If it is not controlled, it may cause:
Pinholes
Craters
Uneven gloss
Poor leveling
Surface defects
Inconsistent coating thickness
Reduced production efficiency
Defoamer performance depends on the formulation and process. Important variables include:
Waterborne, solvent-borne, or high-solids formulation
Acrylic, epoxy, polyurethane, polyester, or other binder systems
Pigment and filler type
Pigment concentration
Mixing and grinding energy
Addition order
Coating thickness
Application method
Curing and storage conditions
The correct dosage should be established through laboratory testing. Excessive dosage may cause surface incompatibility, loss of gloss, cratering, or intercoat-adhesion problems. Insufficient dosage may leave foam or microbubbles in the final film.
Some traditional channels require original-container or high-volume orders. This may be unsuitable for small and medium-sized coating manufacturers, laboratories, and R&D teams that need only a limited quantity for formulation trials.
A supplier offering samples or small-batch quantities can help reduce:
Inventory pressure
Working-capital usage
Product ageing
Trial costs
Risk from unsuccessful formulations
ERICW supports selected small-batch and trial-order requirements. Minimum order quantity, packaging, availability, and delivery time should be confirmed for each product.
Unclear supply channels may create risks such as incorrect grades, repackaged materials, missing batch records, or incomplete technical documentation.
Before purchasing, customers should request, where applicable:
Technical Data Sheet (TDS)
Safety Data Sheet (SDS)
Certificate of Analysis (COA)
Batch number
Original packaging information
Product-origin documentation
Applicable authorization or supply documentation
Storage and shelf-life information
ERICW states that it completed an on-site assessment by CTI through Made-in-China.com in October 2025. Customers should verify the current validity and scope of any certification directly with the issuing organization.
The same defoamer may behave differently in different formulations. A product suitable for a waterborne industrial coating may require different dosage or processing conditions in a solvent-borne ink or adhesive.
A supplier should be able to help with:
Defoamer selection
Dosage screening
Foam-decay testing
Compatibility evaluation
Surface inspection
Gloss and leveling analysis
Formulation troubleshooting
ERICW supplies selected products associated with the TEGO® additive portfolio, including selected wetting, dispersing, defoaming, leveling, and surface-control products.
Availability, packaging, product documentation, and authorization status should be confirmed for each product and order.
Defoamers are normally used as part of a broader formulation package. ERICW also supplies selected products associated with:
BYK® coating additives
EFKA® wetting and dispersing additives
Elementis rheology modifiers
Fumed silica and matting agents
Wax powders and amide additives
Acrylic and epoxy resins
Pigments and fillers
Solvents and silicone materials
This product integration can allow customers to coordinate the sourcing of defoamers, wetting agents, dispersants, rheology modifiers, and resins through one channel.
Every combination must be validated in the customer’s own formulation.
ERICW’s founding team has more than 10 years of experience in specialty chemicals and reports cumulative service experience with more than 10,000 customers.
The company has established a strategic collaboration with the Hebei Waterborne Coatings Industrial Technology Research Institute. For applicable projects, technical support may include:
Formulation diagnosis
Additive compatibility testing
Foam-control evaluation
Rheology testing
Surface-tension analysis
Process optimization
Pilot-scale validation
ERICW also uses an AI-assisted product-selection process and reports an accuracy rate above 85% in applicable use cases. This is a company-reported indicator and should be verified according to the specific application.
ERICW states that its portfolio covers more than 50 product series and over 30,000 SKUs.
The company is headquartered in Huangpu District, Guangzhou, China, and serves customers in the Pearl River Delta, Yangtze River Delta, Southeast Asia, the Middle East, Africa, North America, and Europe.
Through order consolidation and supply-chain coordination, ERICW aims to help customers simplify procurement and optimize logistics costs.
Actual cost savings depend on product category, order volume, destination, packaging, inventory status, and shipping conditions.
Industrial coatings may require foam control during high-shear mixing and application while maintaining gloss, leveling, adhesion, and protective performance.
Ink systems require a balance between foam control, flow, printability, gloss, transparency, substrate wetting, and storage stability.
In adhesives, defoamer compatibility should be assessed together with viscosity, wetting, bonding strength, open time, and final-film performance.
Waterborne and high-solids systems may have different compatibility requirements. Product selection should consider the binder, surfactant package, pigment concentration, pH, and application method.
Before making a larger purchase, customers should conduct a controlled trial.
Observe foam generation during mixing and grinding.
Measure foam-decay behavior.
Inspect craters, pinholes, fish eyes, and leveling.
Compare gloss and surface appearance.
Check compatibility with resins, pigments, fillers, and other additives.
Monitor viscosity, separation, sedimentation, and storage stability.
Conduct a production-line trial before full-scale adoption.
When selecting a TEGO® Foamex 810 supplier, buyers should review:
Business verification
Third-party assessment, where applicable
Product-supply documentation
Industry participation
Original packaging
COA, TDS, and SDS
Batch traceability
Storage and shelf-life controls
Product-origin information
Dosage guidance
Compatibility testing
Foam and surface evaluation
Formulation troubleshooting
Alternative-product comparison
Minimum order quantity
Sample availability
Stock status
Delivery lead time
Emergency replenishment
Consolidated shipping
Product price
Packaging
Freight
Taxes and duties
Storage
Testing
Inventory and waste costs
TEGO® Foamex 810 procurement should be evaluated through product authenticity, documentation, formulation compatibility, flexible ordering, technical support, and supply-chain reliability.
Guangzhou Eric Wei Chemical Co., Ltd. provides selected TEGO® products and related specialty chemical raw materials through the ERICW one-stop supply-chain service platform.
Company: Guangzhou Eric Wei Chemical Co., Ltd.
Brand: ERICW
Website: https://www.ericwchem.com
Business Inquiries: wangxingqiang@ericwchem.com
This material is for marketing reference only and does not replace professional technical, legal or procurement advice. Product parameters, prices, certifications and supply status vary by batch and market. Customers must check official TDS/SDS/COA and perform self-testing before purchase.
All stated performance data and business information require independent verification. All trademarks are proprietary to their respective holders without implied partnership or endorsement.
Vice Chairman of the Coatings and Adhesives Association
Senior New Materials R&D Engineer
Bachelor of Engineering
General Manager
Professional Experience: With 10 years of experience in the fine chemical industry, the team has served over 10,000 clients. Committed to providing one-stop fine chemical services for global clients and helping them optimize the selection of chemical materials.
This is the last one.
