English
Español
tiếng việt
русский
High reactivity with standard MEKP initiators for rapid gel time control.
Excellent mechanical strength and dimensional stability in cured laminates.
Low styrene emission profile, supporting improved workplace safety and regulatory compliance.
Good compatibility with common fillers, fibers (e.g., E-glass), and additives.
Consistent batch-to-batch viscosity and reactivity for reliable process reproducibility.
Fiberglass-reinforced plastic (FRP) tanks and vessels for chemical storage.
Marine deck and hull components requiring weather resistance and impact resilience.
Industrial grating and structural panels for corrosive environments.
Wind turbine blade root sections and secondary structural parts.
Automotive under-hood composite housings and battery enclosures.
| Chemical Type | Unsaturated orthophthalic polyester resin |
| Product Form | Liquid, ready-to-use |
| Appearance | Clear to pale yellow, homogeneous liquid |
| Viscosity (25°C, mPa·s) | 350–450 |
| Acid Value (mg KOH/g) | 18–22 |
| Gel Time (with 1.0% MEKP, 25°C, min) | 12–16 |
| Solids Content (% w/w) | 99.5–100.0 |
| Primary Applications | Hand lay-up, spray-up, and filament winding processes |
Q1: What is the primary application field for EL-5710?
A: EL-5710 is a specialty unsaturated polyester resin designed primarily for high-performance gel coats and surface layers in fiber-reinforced polymer (FRP) composites, especially where enhanced surface hardness, gloss retention, and resistance to weathering and microcracking are required.
Q2: Is EL-5710 compatible with standard styrene-based curing systems?
A: Yes, EL-5710 is formulated for compatibility with conventional free-radical initiators such as MEKP (methyl ethyl ketone peroxide) and cobalt accelerators. It exhibits good reactivity and gel time control under typical ambient and elevated temperature cure conditions.
Q3: How does EL-5710 compare to general-purpose polyester resins in terms of shrinkage behavior?
A: EL-5710 is engineered to deliver lower post-cure shrinkage and improved dimensional stability compared to standard orthophthalic or isophthalic resins, contributing to superior surface finish and reduced stress at the interface in multi-layer FRP structures.
Q4: Can EL-5710 be used in marine-grade laminating applications?
A: While EL-5710 is optimized for gel coat and top-layer use, it may be incorporated into laminating formulations where enhanced surface integrity and long-term UV resistance are critical — however, full laminate systems should be validated through application-specific testing and are typically built using complementary laminating-grade resins.
Contact With Us:
E-mail: wangxingqiang@ericwchem.com
Have a Questions? Call Us:
Add:
Building A1, Jiete Industrial Park, Huangpu District, Guangzhou City, Guangdong Province, China
