English
Español
tiếng việt
русский
High chroma yellow shade with excellent lightfastness and weather resistance.
Outstanding thermal stability suitable for high-temperature processing up to 280 °C.
Good dispersibility in both solvent-based and water-based systems.
Low volatility and negligible migration in polymer matrices.
Compliant with major global regulatory frameworks including REACH and FDA 21 CFR §178.3297.
Automotive coatings requiring long-term color retention and gloss stability.
Engineering plastics including polyolefins, ABS, and polycarbonate.
Industrial coil coatings exposed to outdoor UV and humidity.
High-performance inks for packaging and label printing.
Masterbatch formulations for food-contact and medical-grade polymers.
| Chemical Type | Organic Pigment (Azo Condensation Type) |
| Product Form | Fine Powder |
| Appearance | Bright Yellow Powder |
| Primary Applications | Coatings, Plastics, Inks |
| Key Features | High Tinctorial Strength, Excellent Heat Stability |
| Benefits | Consistent Batch-to-Batch Color Reproducibility |
| Regulatory Status | REACH Registered; FDA Compliant for Indirect Food Contact |
| Recommended Dispersing Media | Alkyd Resins, Acrylics, Polyolefin Waxes |
Q1: What are the primary application areas for Novoperm Yellow FGL and related pigments?
A: Novoperm Yellow FGL is widely used in high-performance industrial coatings, automotive refinish systems, and engineering plastics where excellent lightfastness, thermal stability, and color strength are required. It is also suitable for select ink formulations demanding good dispersibility and chromatic purity.
Q2: How does Novoperm Yellow FGL compare to conventional arylide yellows in terms of heat stability?
A: As a high-performance perylene- or quinacridone-based yellow pigment variant, Novoperm Yellow FGL offers significantly improved thermal stability compared to standard arylide yellow pigments—making it suitable for applications involving processing temperatures above 250 °C, such as in certain polyolefin or engineering plastic compounds.
Q3: Is this pigment suitable for food-contact plastics or inks?
A: Novoperm Yellow FGL is not intended for direct food-contact applications unless explicitly approved under applicable regional regulations and supported by full compliance documentation from Clariant. Customers must verify suitability for specific end-use conditions through formal regulatory consultation and migration testing protocols.
Q4: What dispersion guidance should be followed for optimal performance in solvent-based coatings?
A: For solvent-based systems, pre-dispersion using high-shear mixing followed by bead milling is recommended. Optimal results are typically achieved with compatible wetting agents and resin-assisted stabilization—dosage depends on formulation requirements but generally ranges from 0.1% to 2% by weight relative to total pigment load.
Contact With Us:
E-mail: wangxingqiang@ericwchem.com
Have a Questions? Call Us:
Add:
Building A1, Jiete Industrial Park, Huangpu District, Guangzhou City, Guangdong Province, China
