English
Español
tiếng việt
русский
Excellent elasticity and recovery performance at room and elevated temperatures.
Good processability via injection molding and extrusion with low energy consumption.
Enhanced soft-touch feel and surface gloss for premium aesthetic finishes.
Compatible with polypropylene (PP) and polyethylene (PE) for co-injection and overmolding.
Halogen-free formulation meeting RoHS and REACH compliance requirements.
Automotive interior trim components including door panels and center console overlays.
Consumer electronics housings and protective grips for power tools and appliances.
Medical device grips and non-sterile wearable component housings.
Packaging closures and soft-seal gaskets for household and personal care products.
Industrial handles, seals, and vibration-damping pads in machinery assemblies.
| Chemical Type | Thermoplastic Elastomer (TPE) – Styrenic Block Copolymer (SBC) based |
| Product Form | Pellets |
| Appearance | Translucent off-white granules |
| Hardness (Shore A) | 75 ± 3 |
| Melt Flow Rate (200°C/5 kg) | 22–28 g/10 min |
| Density | 0.90–0.92 g/cm³ |
| Key Features | Soft-touch, PP/PE compatibility, easy colorability, low compression set |
| Primary Applications | Overmolding, soft-grip components, flexible seals, decorative trims |
Q1: What is the primary polymer base of Hyundai EP7080N/1002 TPE?
A: Hyundai EP7080N/1002 is a thermoplastic elastomer based on a styrenic block copolymer (SBC) architecture, offering a balanced combination of rubber-like elasticity and thermoplastic processability.
Q2: Is this grade suitable for overmolding onto polypropylene (PP) or polyethylene (PE) substrates?
A: Yes, EP7080N/1002 is specifically formulated to provide good adhesion to polyolefin substrates such as PP and PE without requiring primers or surface treatment under standard injection molding conditions.
Q3: What are the recommended drying conditions prior to processing?
A: To ensure optimal melt stability and surface quality, it is recommended to dry EP7080N/1002 at 70–80 °C for 2–4 hours using a dehumidifying dryer. Residual moisture levels should be kept below 0.05% before processing.
Q4: Can this TPE be used in applications requiring skin contact or repeated handling?
A: Yes — EP7080N/1002 is formulated with non-toxic, non-migrating additives and exhibits low extractables, making it appropriate for consumer-facing applications such as grips, seals, and soft-touch components where tactile performance and user safety are important.
Contact With Us:
E-mail: wangxingqiang@ericwchem.com
Have a Questions? Call Us:
Add:
Building A1, Jiete Industrial Park, Huangpu District, Guangzhou City, Guangdong Province, China
