English
Español
tiếng việt
русский
Excellent elasticity and recovery performance across a wide temperature range (−40 °C to 90 °C).
Good processability via injection molding, extrusion, and overmolding onto PP, ABS, and PS substrates.
Low compression set and high abrasion resistance for durable sealing and grip applications.
Halogen-free formulation compliant with RoHS and REACH regulatory requirements.
Soft-touch feel with邵氏 A hardness of 65 ± 3, offering ergonomic comfort and aesthetic appeal.
Automotive interior trim components including door panels, armrests, and gear shift knobs.
Consumer electronics housings and protective grips for power tools, toothbrushes, and handheld devices.
Sealing solutions for HVAC ducts, appliance gaskets, and water-resistant enclosures.
Medical device overmolded grips and non-slip surfaces requiring biocompatibility support (ISO 10993 pre-screened).
Household appliance components such as detergent dispenser caps, control dials, and flexible hinges.
| Chemical Type | Styrenic Thermoplastic Elastomer (TPE-S) |
| Product Form | Pellets |
| Appearance | Translucent off-white granules |
| Shore A Hardness | 65 ± 3 |
| Melt Flow Rate (200 °C/5 kg) | 18–22 g/10 min |
| Density | 0.92 g/cm³ |
| Tensile Strength (ASTM D412) | 8.5 MPa |
| Elongation at Break (ASTM D412) | 420 % |
Q1: What is the primary application domain for Hyundai EP7065N/1002 TPE?
A: Hyundai EP7065N/1002 TPE is primarily engineered for soft-touch overmolding and functional elastomeric components in automotive interiors, consumer electronics housings, and medical device grips—where balanced processability, surface aesthetics, and long-term elasticity are required.
Q2: Is EP7065N/1002 compatible with common thermoplastics used in two-shot molding?
A: Yes, EP7065N/1002 demonstrates good adhesion to polypropylene (PP), polyethylene (PE), and ABS substrates without requiring primers or special surface treatments—making it suitable for standard two-shot injection molding processes.
Q3: How does EP7065N/1002 perform under elevated temperature conditions during processing and end-use?
A: This TPE maintains dimensional stability and mechanical integrity during typical injection molding cycles and exhibits reliable performance at continuous use temperatures up to approximately 70°C, with short-term exposure tolerance near 90°C—suitable for non-under-hood automotive and general industrial applications.
Q4: Does EP7065N/1002 contain halogens or heavy metals?
A: No, EP7065N/1002 is formulated without intentionally added halogens, lead, cadmium, mercury, or hexavalent chromium, aligning with global RoHS and REACH compliance expectations for restricted substances.
Q5: What is the recommended drying protocol prior to processing?
A: To ensure optimal melt consistency and surface quality, it is recommended to dry EP7065N/1002 at 60–70°C for 2–4 hours using a desiccant dryer, especially if the material has been exposed to ambient humidity for extended periods.
Contact With Us:
E-mail: wangxingqiang@ericwchem.com
Have a Questions? Call Us:
Add:
Building A1, Jiete Industrial Park, Huangpu District, Guangzhou City, Guangdong Province, China
