English
Español
tiếng việt
русский
High-performance silicone elastomer blend offering excellent thermal stability up to 200 °C continuous use.
Combines low compression set with superior elasticity for long-term sealing and gasketing performance.
Ready-to-mold formulation requiring no additional catalyst or crosslinker—simplifies processing and reduces scrap.
Excellent electrical insulation properties with stable dielectric constant across wide temperature and frequency ranges.
Meets UL 94 HB flammability rating and complies with RoHS and REACH regulatory requirements.
Automotive under-hood components including sensor housings, ignition boots, and coolant system seals.
Consumer electronics encapsulation and vibration-damping mounts for wearables and portable devices.
Industrial fluid handling gaskets and diaphragms exposed to oils, coolants, and mild chemicals.
Medical device enclosures and non-invasive wearable sensor interfaces requiring biocompatibility support (ISO 10993 tested).
LED lighting thermal interface pads and optical lens bonding layers leveraging low outgassing and UV resistance.
| Chemical Type | Platinum-cured methylvinylsiloxane-based silicone elastomer blend |
| Product Form | Two-part liquid (Part A + Part B), pre-measured for 1:1 mix ratio by weight |
| Appearance | Translucent, low-viscosity liquid (Part A); colorless to pale amber liquid (Part B) |
| Shore A Hardness (7 days @ 25 °C) | 40 ± 3 |
| Tensile Strength (ASTM D412) | 8.5 MPa typical |
| Elongation at Break (ASTM D412) | 420% typical |
| Volume Resistivity (ASTM D257) | 1.2 × 10¹⁵ Ω·cm |
| Key Benefits | Process efficiency, consistent cure profile, low post-cure shrinkage, and high reliability in dynamic environments |
Contact With Us:
E-mail: wangxingqiang@ericwchem.com
Have a Questions? Call Us:
Add:
Building A1, Jiete Industrial Park, Huangpu District, Guangzhou City, Guangdong Province, China
