Guangzhou Eric Wei Chemical Co., Ltd.
Guangzhou Eric Wei Chemical Co., Ltd.

Dow INFUSE 9807 Impact modifier

Dow INFUSE™ 9807 is a high-performance olefin block copolymer designed for durable, flexible injection molded industrial and consumer goods. It features a higher set temperature for faster injection cycle times, while its high crystallization temperature and low density drive lower production costs and reduced part weight. The talc-dusted surface reduces pellet blocking, making it an ideal choice for balancing efficiency and performance.

Features Of Dow INFUSE 9807 Impact modifier

  1. High flow & rapid molding: High melt index and set temperature enable high-speed injection molding, significantly reducing cycle times.

  2. Superior high-temperature performance: Maintains elasticity and mechanical properties at elevated service temperatures for harsh conditions.

  3. High elastic recovery: Quick rebound after stress with minimal permanent deformation during long-term use.

  4. Cost & weight optimization: High crystallization temperature and low density reduce production costs and part weight.

  5. Enhanced processability: Talc-dusted surface reduces pellet blocking, with short equipment setup times.

  6. Strong compliance: Meets EU 10/2011 and U.S. FDA FCN 424 food contact standards.

Typical Applications Of Dow INFUSE 9807 Impact modifier

  1. Durable injection molded products: Industrial components and consumer durables such as tool handles and elastic parts for appliance housings.

  2. Lightweight structural parts: Automotive interior components and electronic device housings, balancing strength and weight reduction.

  3. High-elastic buffers: Shock-absorbing components for medical devices and sports equipment, maintaining performance under long-term compression.

  4. Composite elastic formulations: Blended with other OBCs to create functional parts with customized hardness and elasticity.

Specifications Of Dow INFUSE 9807 Impact modifier

PropertyNominal Value (SI / English)
Physical
Density0.866 g/cm³
Melt Index (190°C/2.16 kg)15 g/10 min
Mechanical (Compression Molded)
Tensile Modulus - 100% Secant1.30 MPa / 189 psi
Tensile Strength (Break)1.21 MPa / 176 psi
Tensile Elongation (Break)1200 %
Elastomer Properties
Tensile Strength (Break)3.00 MPa / 435 psi
Tensile Elongation (Break)2200 %
Tear Strength17.0 kN/m / 97.1 lbf/in
Compression Set (21°C)16 %
Compression Set (70°C)76 %
Hardness
Durometer Hardness, Shore A (Compression Molded)55
Thermal
Melting Temperature (DSC)118 °C / 244 °F
TMA (1.00 mm)60 °C / 140 °F
Additives
AntiblockNo
SlipNo
Processing AidNo
Surface TreatmentTalc dusted
Compliance
EU RegulationEU 10/2011
FDA ComplianceFCN 424


























Get in Touch with ERICW
Let competitive chemical materials go global.

Your Name *

Your Email *

Your Phone

Country

Your Message *