DOW XIAMETER ACP-0080 is a 100% active self-emulsifying silicone defoamer built for tough industrial settings. It appears as a transparent to pale-yellow liquid (800-1,200 mPa·s viscosity), performing stably at pH 1-14 and ≤120°C, and enables quick foam collapse (48+ hours suppression) in jet dyeing and metalworking fluid systems. Certified by FDA 21 CFR 175.300 and REACH, it lowers defoamer use by 40% via improved dispersion in high-shear processes.
Wide pH Suitability: Works in pH 1-14 systems such as acidic electroplating wastewater.
Shear & Heat Resistance: Stays stable under 10,000 rpm shear and continuous 120°C operations.
Self-Emulsifying Ability: Creates stable emulsions without needing extra surfactants.
Food-Grade Compliance: Meets FDA standards for fermentation and packaging adhesives.
Cost-Saving Performance: Offers 30% higher defoaming efficiency at 0.1%-0.3% dosage in textile dyeing.
Textile Jet Dyeing: Manages foam in pH 10-12 systems, cutting rework rate by 25%.
Metalworking Fluids: Suppresses foam in cutting oils (pH 8-10) to boost cooling efficiency.
Industrial Fermentation: Controls foam in food-grade fermenters (compliant with GB 2760-2014).
Epoxy Resins: Improves resin conversion rate during 120°C polymerization.
Agrochemicals: Reduces sludge volume in high-COD wastewater (≥8,000 mg/L).
Type | Self-emulsifying silicone defoamer |
Appearance | Transparent to pale-yellow liquid |
Active Content | Polydimethylsiloxane + hydrophobic silica (100%) |
Dynamic Viscosity | 800-1,200 mPa·s |
pH Range | 1-14 |
Surface Tension | 23.5 dyn/cm |
Flash Point | >100°C (closed cup) |
Thermal Stability | No stratification (120°C/24h) |
Shelf Life | 24 months (sealed, 5-35°C) |
Packaging | 200kg/PE drum |
Contact With Us:
E-mail: wangxingqiang@ericwchem.com
Have a Questions? Call Us:
Add:
Building A1, Jiete Industrial Park, Huangpu District, Guangzhou City, Guangdong Province, China