English
Español
tiếng việt
русский
Enhanced flexibility and impact resistance in cured epoxy systems.
Low viscosity for improved resin compatibility and easy handling at room temperature.
Reduced exotherm during curing, enabling safer processing of thick-section castings.
Good chemical resistance to alkalis, solvents, and mild acids after full cure.
Extended pot life (4–6 hours at 25°C) without sacrificing final mechanical performance.
Industrial flooring coatings requiring durability and abrasion resistance.
Electrical encapsulation and potting compounds for transformers and sensors.
Marine and offshore protective coatings for steel substrates.
Adhesives for structural bonding of composites and metals.
Repair mortars and grouts for concrete infrastructure rehabilitation.
| Chemical Type | Modified polyamide amine |
| Product Form | Liquid |
| Appearance | Amber to light brown transparent liquid |
| Viscosity (25°C) | 300–600 mPa·s |
| Amine Value | 280–320 mg KOH/g |
| Specific Gravity (25°C) | 0.95–0.99 g/cm³ |
| Flash Point | ≥110°C (PMCC) |
| Storage Stability | 12 months in sealed container at 5–30°C |
Q1: What is the primary functional advantage of Jiangqiao Modified Polyamide 6632 compared to standard polyamide curing agents?
A: Jiangqiao Modified Polyamide 6632 offers enhanced compatibility with aromatic and aliphatic epoxy resins, improved pot life control at ambient temperatures, and better low-temperature reactivity—enabling more consistent cure performance in variable processing conditions without requiring elevated post-cure cycles.
Q2: Can this curing agent be used in high-solids or solvent-free epoxy systems?
A: Yes, it is specifically formulated for use in medium-to-high solids and 100% solids epoxy formulations. Its modified structure contributes to lower viscosity and improved resin blend stability, supporting efficient mixing and reduced volatile organic content in finished coatings or adhesives.
Q3: How does humidity affect the curing performance of Jiangqiao Modified Polyamide 6632?
A: While polyamide-based systems are generally less sensitive to ambient moisture than amine-terminated alternatives, prolonged exposure to high relative humidity (>85%) during early-stage cure may slightly delay surface dryness or influence final film hardness. Optimal results are achieved under controlled humidity conditions (40–70% RH) during application and initial cure.
Q4: Is Jiangqiao Modified Polyamide 6632 suitable for applications requiring FDA-compliant food-contact coatings?
A: This product is not pre-certified for direct food-contact applications. Formulators intending to use it in such systems must conduct full regulatory evaluation—including migration testing and compliance verification—within their final cured formulation and intended end-use conditions.
Contact With Us:
E-mail: wangxingqiang@ericwchem.com
Have a Questions? Call Us:
Add:
Building A1, Jiete Industrial Park, Huangpu District, Guangzhou City, Guangdong Province, China
