English
Español
tiếng việt
русский
High chroma and excellent red shade consistency for vibrant, reproducible coloration.
Outstanding thermal stability suitable for high-temperature processing up to 240 °C.
Good lightfastness and weather resistance in demanding outdoor applications.
Low volatile organic compound (VOC) content, supporting sustainable formulation requirements.
Excellent dispersibility in both solvent-based and water-based systems without grinding aids.
Automotive coatings including basecoats and clearcoat-compatible topcoats.
Industrial maintenance paints for infrastructure and equipment protection.
Plastic coloration for polyolefins, ABS, and engineering thermoplastics.
Printing inks for packaging films and flexible laminates.
High-performance powder coatings requiring thermal stability and gloss retention.
| Chemical Type | Quinacridone derivative |
| Product Form | Fine free-flowing powder |
| Appearance | Red-violet crystalline powder |
| Primary Applications | Coatings, plastics, inks |
| Key Features | Thermal stability, dispersion efficiency, color strength |
| Benefits | Reduced energy consumption during compounding, improved batch-to-batch consistency |
| Regulatory Compliance | REACH registered; compliant with FDA 21 CFR §178.3297 for indirect food contact applications |
| Storage Conditions | Store in cool, dry place below 30 °C; protect from moisture and direct sunlight |
Q1: What are the primary application areas for Arrovide Red 1102B 122?
A: Arrovide Red 1102B 122 is widely used in high-performance industrial coatings, automotive refinish systems, and engineering plastics where excellent heat stability, lightfastness, and gloss retention are required. It is also suitable for select ink formulations demanding strong chroma and good dispersibility.
Q2: How does this pigment perform under thermal processing conditions?
A: As a high-stability organic pigment, Arrovide Red 1102B 122 exhibits good resistance to thermal degradation during typical melt-processing of thermoplastics such as polyolefins and engineering resins. Performance remains robust up to temperatures commonly encountered in extrusion and injection molding, though optimal results depend on residence time and matrix compatibility.
Q3: Is this pigment suitable for use in food-contact compliant systems?
A: Arrovide Red 1102B 122 is not pre-approved for direct food-contact applications. Its suitability for regulated end-uses depends on full formulation assessment, including migration behavior and compliance with applicable regional regulations. Customers must conduct appropriate testing and verification within their specific system.
Q4: What dispersion characteristics can be expected in solvent-based coatings?
A: The pigment demonstrates good wettability and dispersibility in common aromatic and aliphatic solvent systems. With appropriate dispersing agents and standard milling techniques, it readily achieves fine particle size distribution and stable coloristic performance, supporting high-gloss and low-haze finishes.
Q5: How should dosage be determined for optimal color strength and cost-efficiency?
A: Dosage depends on the target shade depth, substrate opacity, and desired performance balance. It is typically used at low concentrations—generally ranging from 0.1% to 2% by weight relative to the total formulation—making it efficient for achieving strong red tones without excessive loading.
Contact With Us:
E-mail: wangxingqiang@ericwchem.com
Have a Questions? Call Us:
Add:
Building A1, Jiete Industrial Park, Huangpu District, Guangzhou City, Guangdong Province, China
