English
Español
tiếng việt
русский
Low-viscosity liquid bisphenol-A epoxy resin offering excellent processability and ease of handling.
High epoxy equivalent weight (EEW) suitable for formulations requiring controlled reactivity and extended pot life.
Superior adhesion to metals, composites, and cured polymer substrates.
Good chemical resistance to acids, alkalis, and polar solvents in cured form.
Consistent batch-to-batch quality meeting stringent Dow manufacturing standards.
Structural adhesives for aerospace and automotive bonding.
Matrix resin in fiber-reinforced composites for wind turbine blades and industrial laminates.
Electrical encapsulants and potting compounds for power electronics and transformers.
High-performance coatings for corrosion protection of steel infrastructure.
Formulation base for specialty tooling and casting resins.
| Chemical Type | Bisphenol-A based diglycidyl ether epoxy resin |
| Product Form | Clear to pale yellow liquid |
| Appearance | Homogeneous, low-viscosity liquid at 25°C |
| Epoxy Equivalent Weight (EEW) | Approx. 510–540 g/eq |
| Viscosity at 25°C | 10,000–14,000 cP |
| Chlorine Content | ≤ 1,200 ppm |
| Volatiles Content | ≤ 0.3 wt% |
| Primary Applications | Adhesives, composites, encapsulants, protective coatings |
Q1: What is the primary functional role of Dow DER A 332 in epoxy formulations?
A: Dow DER A 332 is a liquid bisphenol-A-based epoxy resin designed primarily as a reactive diluent and viscosity modifier. It reduces formulation viscosity without significantly compromising crosslink density or thermal performance, enabling improved processability in casting, potting, and coating applications.
Q2: How does Dow DER A 332 compare to conventional solid epoxy resins like DER 331 in handling and processing?
A: Unlike solid epoxy resins that require heating for melting and handling, Dow DER A 332 is supplied as a low-viscosity liquid at ambient temperature. This eliminates pre-melting steps, simplifies metering and mixing, and supports cold-processing techniques—especially beneficial in high-throughput or heat-sensitive manufacturing environments.
Q3: Is Dow DER A 332 compatible with standard amine and anhydride curing agents?
A: Yes, Dow DER A 332 exhibits broad compatibility with common epoxy curing agents, including aliphatic and cycloaliphatic amines, aromatic amines, and acid anhydrides. Its reactivity profile aligns well with typical epoxy-amine kinetics, supporting full cure development under standard thermal schedules.
Q4: Can Dow DER A 332 be used in applications requiring FDA compliance for indirect food contact?
A: Dow DER A 332 is not pre-approved for food-contact applications. While it may be incorporated into finished systems where regulatory compliance is achieved through full formulation evaluation and migration testing, end-use compliance must be verified by the formulator against applicable regional regulations and intended service conditions.
Contact With Us:
E-mail: wangxingqiang@ericwchem.com
Have a Questions? Call Us:
Add:
Building A1, Jiete Industrial Park, Huangpu District, Guangzhou City, Guangdong Province, China
