English
Español
tiếng việt
русский
High reactivity with standard peroxide initiators, enabling fast gel times and efficient production cycles.
Excellent thixotropic behavior for superior fiber wet-out and reduced air entrapment in reinforced composites.
Good mechanical strength retention after post-curing, supporting structural integrity in demanding applications.
Low styrene emission profile compared to conventional orthophthalic resins, enhancing workplace safety and compliance.
Consistent batch-to-batch viscosity and reactivity, ensuring process reliability in automated FRP manufacturing.
Fiberglass-reinforced plastic (FRP) tanks and chemical storage vessels.
Pultruded profiles for corrosion-resistant structural components.
Centrifugally cast pipes used in water and wastewater infrastructure.
Sheet molding compound (SMC) for automotive under-hood and industrial enclosures.
Hand lay-up and spray-up fabrication of marine decks, panels, and sanitary fixtures.
| Chemical Type | Orthophthalic unsaturated polyester resin |
| Product Form | Liquid, ready-to-use |
| Appearance | Clear to pale yellow viscous liquid |
| Viscosity (25°C, mPa·s) | 450–650 |
| Gel Time (at 25°C with 1.0 wt% MEKP) | 12–18 minutes |
| Solids Content (wt%) | 99.5–100.0 |
| Density (25°C, g/cm³) | 1.11–1.13 |
| Styrene Content (wt%) | 38–42 |
Q1: What are the key performance characteristics of ETERSET 2206AP?
A: ETERSET 2206AP is a medium-viscosity, general-purpose unsaturated polyester resin offering balanced mechanical strength, good chemical resistance, and reliable cure response with standard peroxide initiators. It is formulated for ease of handling in open-mold and spray-up processes, with consistent reactivity and low exotherm during curing.
Q2: Which initiators are typically recommended for use with this resin?
A: ETERSET 2206AP is compatible with common methyl ethyl ketone peroxide (MEKP) formulations, including both paste- and liquid-type systems. Cure profiles can be adjusted using standard accelerators such as cobalt naphthenate or cobalt octoate, depending on ambient conditions and processing requirements.
Q3: Can this resin be used in marine or corrosion-resistant applications?
A: Yes — ETERSET 2206AP delivers good resistance to water, mild acids, and alkaline environments, making it suitable for non-critical marine components, tank linings, and industrial corrosion barriers when properly reinforced and post-cured. For severe service conditions, evaluation against specific exposure media is recommended.
Q4: How does ETERSET 2206AP compare to vinyl ester resins in terms of performance and cost?
A: As an unsaturated polyester resin, ETERSET 2206AP offers lower raw material cost and easier processability than vinyl esters, while providing adequate performance for many structural and semi-structural applications. Vinyl esters generally offer superior hydrolytic stability and chemical resistance, particularly under elevated temperature or aggressive chemical exposure — selection depends on end-use performance priorities and economic constraints.
Contact With Us:
E-mail: wangxingqiang@ericwchem.com
Have a Questions? Call Us:
Add:
Building A1, Jiete Industrial Park, Huangpu District, Guangzhou City, Guangdong Province, China
