English
Español
tiếng việt
русский
High solids content for reduced VOC emissions and improved coating efficiency.
Excellent UV resistance and long-term color retention in exterior applications.
Good compatibility with common crosslinkers, including melamine and polyisocyanates.
Superior gloss development and film clarity in clear and pigmented coatings.
Controlled rheology for optimal spray application and leveling performance.
Automotive OEM and refinish topcoats.
Industrial maintenance coatings for metal and plastic substrates.
Architectural high-performance façade and cladding systems.
Powder coating base resins for hybrid acrylic-polyester formulations.
Can and coil coating systems requiring weatherability and adhesion.
| Chemical Type | Thermoplastic acrylic copolymer |
| Product Form | Clear to slightly hazy liquid |
| Appearance | Colorless to pale yellow solution |
| Solvent System | Propylene glycol monomethyl ether acetate (PGMEA) and xylene blend |
| Solids Content (wt%) | 45–48% |
| Acid Number (mg KOH/g) | 3–6 |
| Viscosity (mPa·s, 25°C) | 1,200–1,800 |
| Primary Applications | High-gloss automotive and industrial coatings |
Q1: What is the primary function of Dow F-10 Acrylic Resin in coating and ink formulations?
A: Dow F-10 Acrylic Resin functions primarily as a rheology modifier and surface enhancer, providing improved flow control, leveling, and substrate wetting without significantly affecting gloss or film clarity.
Q2: Is Dow F-10 compatible with waterborne systems?
A: Yes, Dow F-10 is specifically designed for compatibility with waterborne acrylic, polyurethane, and hybrid resin systems, and it disperses readily without requiring high-shear pre-mixing or solvent assistance.
Q3: How should Dow F-10 be incorporated into a formulation?
A: It is typically added during the let-down stage under moderate agitation. Pre-dilution with water or a compatible co-solvent may be used to ensure uniform dispersion, especially in low-viscosity systems.
Q4: Does Dow F-10 contribute to film hardness or chemical resistance?
A: While not a primary film-former, Dow F-10 can support enhanced surface integrity and modest improvements in early-stage solvent and water resistance due to its surface-active acrylic architecture — effects are formulation-dependent and best evaluated empirically.
Q5: Can Dow F-10 be used in food-contact coatings?
A: Dow F-10 is not intended for direct food-contact applications unless explicitly approved by regulatory authorities and validated within a fully compliant finished formulation — users must conduct their own regulatory assessment based on end-use conditions and applicable jurisdictional requirements.
Contact With Us:
E-mail: wangxingqiang@ericwchem.com
Have a Questions? Call Us:
Add:
Building A1, Jiete Industrial Park, Huangpu District, Guangzhou City, Guangdong Province, China
