English
Español
tiếng việt
русский
Excellent thermal stability with continuous service temperature range from −60 °C to +180 °C.
Low compression set and high elasticity for long-term sealing performance under dynamic stress.
Platinum-catalyzed, addition-cure chemistry enabling precise control over cure kinetics and minimal by-products.
Good electrical insulation properties compliant with IEC 60243 standards.
Ready-to-use two-component system with simple 1:1 mixing ratio by weight or volume.
Automotive engine gaskets and vibration-damping mounts exposed to high temperatures and oils.
Industrial sealing components for pumps, valves, and hydraulic systems requiring chemical resistance.
Electrical encapsulation and potting of sensors, connectors, and power electronics.
Medical device housings and seals meeting ISO 10993 biocompatibility requirements (when fully cured).
Custom molded parts for aerospace applications where dimensional stability and flame retardancy are critical.
| Chemical Type | Platinum-catalyzed addition-cure silicone rubber |
| Product Form | Two-component liquid silicone rubber (Part A and Part B) |
| Appearance | Part A: Translucent, low-viscosity liquid; Part B: Translucent, low-viscosity liquid |
| Mixing Ratio (by weight) | 1:1 |
| Cure Mechanism | Heat-cure (recommended: 150 °C for 5–10 minutes) |
| Shore A Hardness (ASTM D2240) | 30 ± 2 |
| Tensile Strength (ASTM D412) | ≥ 6.0 MPa |
| Elongation at Break (ASTM D412) | ≥ 350 % |
Contact With Us:
E-mail: wangxingqiang@ericwchem.com
Have a Questions? Call Us:
Add:
Building A1, Jiete Industrial Park, Huangpu District, Guangzhou City, Guangdong Province, China
