English
Español
tiếng việt
русский
Excellent elasticity and recovery performance across a wide temperature range (−40 °C to +80 °C).
Good processability via injection molding, extrusion, and two-shot overmolding with PP, PS, and ABS.
Low extractables and compliant with EU REACH and RoHS directives for regulated applications.
Superior grip and soft-touch feel with邵氏 A hardness of 80–85 Shore A (ASTM D2240).
Resistant to UV degradation and maintains physical properties after accelerated weathering exposure.
Automotive interior trim components including gear knobs, door handles, and control buttons.
Consumer electronics protective cases and ergonomic grips for power tools and medical devices.
Household appliance seals, gaskets, and soft-touch overlays for control panels.
Personal care product housings such as electric toothbrush grips and hair dryer handles.
Industrial hand tools requiring slip-resistant, fatigue-resistant overmolded surfaces.
| Chemical Type | Thermoplastic Elastomer (TPE) — Styrenic Block Copolymer (SBC) based |
| Product Form | Pellets |
| Appearance | Translucent to semi-opaque, natural color (custom colorable) |
| Shore Hardness (A) | 80–85 (ASTM D2240) |
| Density | 0.90–0.92 g/cm³ (ASTM D792) |
| Melt Flow Rate (230 °C/2.16 kg) | 15–20 g/10 min (ASTM D1238) |
| Tensile Strength | 8–10 MPa (ASTM D412) |
| Elongation at Break | 350–450% (ASTM D412) |
Q1: What is the primary application domain for Europe VTC TPE 938012 TPE?
A: Europe VTC TPE 938012 TPE is primarily engineered for soft-touch overmolding and functional elastomeric components in consumer goods, automotive interiors, and medical device housings where consistent processability and skin-friendly tactile performance are required.
Q2: Is this TPE suitable for injection molding and two-shot processing?
A: Yes — Europe VTC TPE 938012 TPE is specifically formulated for reliable injection molding, including two-shot and multi-material processes. It exhibits good melt stability, low mold fouling tendency, and strong adhesion to common engineering thermoplastics such as PP, ABS, and PC.
Q3: How should this TPE be dried prior to processing?
A: To ensure optimal surface quality and mechanical consistency, it is recommended to dry Europe VTC TPE 938012 TPE at 60–70 °C for 2–4 hours using desiccant-assisted drying. Moisture content should be maintained below 0.05% before processing.
Q4: Does this grade comply with food contact or skin-contact safety requirements?
A: Europe VTC TPE 938012 TPE is manufactured using non-toxic, non-migrating ingredients and is intended for applications requiring skin compatibility and low-extractables performance. While not pre-certified for specific regulatory frameworks, it is commonly used in formulations that meet general EU and US requirements for consumer-facing elastomeric parts.
Contact With Us:
E-mail: wangxingqiang@ericwchem.com
Have a Questions? Call Us:
Add:
Building A1, Jiete Industrial Park, Huangpu District, Guangzhou City, Guangdong Province, China
