English
Español
tiếng việt
русский
Broad-spectrum antimicrobial activity against bacteria, fungi, and algae.
Stable in water-based formulations across a wide pH range (pH 4–10).
Low volatility and minimal odor, supporting safer handling and lower VOC impact.
Compatible with common surfactants, thickeners, and other formulation ingredients.
Effective at low use concentrations, offering cost-efficient preservation.
Latex paints and architectural coatings.
Industrial and institutional cleaning products.
Adhesives and sealants.
Printing inks and water-based inks.
Carpet and upholstery cleaning solutions.
| Chemical Type | 1,2-Benzisothiazolin-3-one (BIT) |
| Product Form | Liquid concentrate |
| Appearance | Pale yellow to amber clear liquid |
| Active Ingredient Content | 20.0 ± 1.0 wt% BIT |
| pH (1% aqueous solution) | 6.0 – 8.0 |
| Density (20°C) | 1.08 – 1.12 g/cm³ |
| Solubility | Miscible with water and common polar organic solvents |
| Storage Stability | ≥ 24 months at 5–25°C in original sealed container |
Q1: What is the primary active ingredient in Dow BIOBAN BIT 20 Biocide?
A: The active ingredient is 1,2-benzisothiazolin-3-one (BIT), formulated as a stable aqueous solution optimized for ease of handling and broad-spectrum antimicrobial performance in industrial applications.
Q2: In which types of formulations is Dow BIOBAN BIT 20 Biocide commonly used?
A: It is widely employed in water-based industrial products such as latex paints, adhesives, metalworking fluids, construction chemicals, and cleaning concentrates—where protection against bacteria, fungi, and algae is required during storage and in-use conditions.
Q3: Is Dow BIOBAN BIT 20 Biocide compatible with common formulation ingredients?
A: Yes, it demonstrates good compatibility with many surfactants, thickeners, defoamers, and pH adjusters typically found in industrial formulations. Compatibility should always be verified experimentally under actual use conditions, particularly in high-salt or extreme pH systems.
Q4: How should Dow BIOBAN BIT 20 Biocide be added to a formulation?
A: It is recommended to add the biocide late in the manufacturing process, after pH adjustment and cooling, to minimize degradation from heat or reactive components. Stirring should be sufficient to ensure uniform distribution without excessive shear.
Q5: Does Dow BIOBAN BIT 20 Biocide provide long-term preservation in finished products?
A: When dosed appropriately for the specific formulation and storage environment, it delivers robust preservation against microbial spoilage over the intended shelf life—though performance may vary depending on contamination load, packaging integrity, and end-use conditions.
Contact With Us:
E-mail: wangxingqiang@ericwchem.com
Have a Questions? Call Us:
Add:
Building A1, Jiete Industrial Park, Huangpu District, Guangzhou City, Guangdong Province, China
