English
Español
tiếng việt
русский
Excellent elasticity and recovery performance across a wide temperature range (−40 °C to +80 °C).
Good processability via injection molding, extrusion, and overmolding onto PP, ABS, and PS substrates.
Low extractables and compliant with EU REACH and RoHS directives for restricted substances.
Soft-touch surface finish with high abrasion resistance and low coefficient of friction.
Recyclable thermoplastic structure enabling multiple reprocessing cycles without significant property loss.
Consumer electronics: soft-grip casings, protective sleeves, and button overlays.
Automotive interior components: gear knobs, control knobs, and trim seals.
Household appliances: ergonomic handles, gaskets, and sealing profiles.
Medical device accessories: non-slip grips, tubing connectors, and wearable housing components.
Personal care products: toothbrush grips, razor handles, and cosmetic applicator tips.
| Chemical Type | Styrenic Block Copolymer (SEBS-based) |
| Product Form | Pellets |
| Appearance | Translucent light amber granules |
| Hardness (Shore A) | 45 ± 3 |
| Density (g/cm³) | 0.90 ± 0.02 |
| Melt Flow Rate (200 °C/5 kg) | 12–16 g/10 min |
| Tensile Strength (MPa) | 8–10 |
| Elongation at Break (%) | ≥ 450 |
Q1: What is the primary application domain for Europe VTC TPE 8004-102?
A: Europe VTC TPE 8004-102 is specifically formulated for soft-touch overmolding and functional elastomeric components in consumer electronics, automotive interior trim, and medical device housings where consistent processing, good adhesion to rigid substrates, and skin-friendly tactile properties are required.
Q2: Is this grade compatible with common engineering thermoplastics like PP, ABS, or PC?
A: Yes — Europe VTC TPE 8004-102 exhibits strong inherent adhesion to polypropylene (PP) and ABS without requiring primers or surface treatment. Adhesion to polycarbonate (PC) may benefit from minor process optimization or optional compatibilizer addition depending on part geometry and bonding requirements.
Q3: What are the typical processing conditions for injection molding this material?
A: Europe VTC TPE 8004-102 processes readily on standard injection molding equipment. Recommended melt temperature range is generally between 170–210 °C, with mold temperatures typically maintained at 20–40 °C. Drying is not usually required unless the material has been exposed to high humidity for extended periods.
Q4: Does this TPE meet regulatory requirements for food contact or skin contact applications?
A: Europe VTC TPE 8004-102 is designed to comply with general requirements for skin-contact applications and is commonly used in products intended for prolonged human contact. For food-contact use, final compliance depends on full formulation, processing conditions, and end-product testing — users should consult their regulatory team and perform appropriate migration or extraction assessments as needed.
Contact With Us:
E-mail: wangxingqiang@ericwchem.com
Have a Questions? Call Us:
Add:
Building A1, Jiete Industrial Park, Huangpu District, Guangzhou City, Guangdong Province, China
