English
Español
tiếng việt
русский
High-consistency, two-part addition-cure silicone rubber with excellent processability in compression and transfer molding.
UL 94 V-0 rated for flame resistance, supporting stringent safety requirements in electrical and electronic applications.
Outstanding thermal stability — maintains mechanical integrity from –60 °C to +200 °C continuously.
Low compression set and high elasticity, ensuring long-term sealing performance and dimensional recovery.
Excellent dielectric properties and electrical insulation across wide temperature and frequency ranges.
High-voltage insulators and bushings for power distribution equipment.
Sealing gaskets and encapsulants for EV battery modules and charging systems.
Protective housings and potting compounds for industrial sensors and control units.
Medical device components requiring biocompatibility support (ISO 10993 tested per request).
Automotive under-hood components exposed to thermal cycling and chemical exposure.
| Chemical Type | Platinum-catalyzed addition-cure silicone rubber |
| Product Form | Two-part liquid system (Part A: base; Part B: catalyst) |
| Appearance | Part A: translucent off-white viscous liquid; Part B: translucent light yellow liquid |
| Shore A Hardness (ASTM D2240) | 52 ± 3 |
| Tensile Strength (ASTM D412) | 8.5 MPa (typical, cured at 150 °C for 10 min) |
| Elongation at Break (ASTM D412) | 320% (typical, cured at 150 °C for 10 min) |
| Density (ASTM D792) | 1.15 g/cm³ (typical) |
| UL Recognition | UL 94 V-0, UL 746C (RTI Elec 180 °C, RTI Imp 150 °C) |
Contact With Us:
E-mail: wangxingqiang@ericwchem.com
Have a Questions? Call Us:
Add:
Building A1, Jiete Industrial Park, Huangpu District, Guangzhou City, Guangdong Province, China
