English
Español
tiếng việt
русский
High-consistency, two-part addition-cure silicone rubber with excellent processability in compression and transfer molding.
UL 94 V-0 rated for flame resistance, supporting stringent safety requirements in electronic and automotive applications.
Outstanding thermal stability across –60 °C to +200 °C continuous service range.
Low compression set (<15% after 70 h at 175 °C), ensuring long-term sealing and gasket performance.
Excellent electrical insulation properties and low dielectric loss over wide frequency and temperature ranges.
Automotive under-hood components including sensor housings and ignition system seals.
High-reliability electrical connectors and insulating bushings for power electronics.
Medical device enclosures requiring biocompatibility (ISO 10993 tested) and sterilization resistance.
Industrial control system gaskets exposed to thermal cycling and chemical exposure.
LED lighting module encapsulation and thermal interface pads for heat dissipation management.
| Chemical Type | Platinum-catalyzed addition-cure silicone rubber |
| Product Form | Two-part liquid (Part A: base; Part B: catalyst) |
| Appearance | Opaque off-white paste (Part A); translucent light yellow liquid (Part B) |
| Shore A Hardness (cured) | 70 ± 3 |
| Tensile Strength (cured) | 8.5 MPa (ASTM D412) |
| Elongation at Break (cured) | 180% (ASTM D412) |
| Volume Resistivity (23 °C) | 1 × 10¹⁵ Ω·cm (ASTM D257) |
| Curing System | Heat-curable (150 °C for 5–10 min typical) |
Contact With Us:
E-mail: wangxingqiang@ericwchem.com
Have a Questions? Call Us:
Add:
Building A1, Jiete Industrial Park, Huangpu District, Guangzhou City, Guangdong Province, China
