English
Español
tiếng việt
русский
High-temperature stability up to 200 °C for extended service life in demanding thermal environments.
Excellent compression set resistance, maintaining sealing integrity after prolonged deformation.
Good electrical insulation properties with low dielectric loss across wide frequency and temperature ranges.
Easy to process via injection molding, extrusion, or compression molding without pre-curing.
Meets UL 94 HB flammability rating and complies with RoHS and REACH regulatory requirements.
Automotive engine compartment gaskets and seals exposed to heat and oil mist.
Electrical insulation components for power distribution systems and EV charging interfaces.
Industrial hose linings requiring flexibility, chemical resistance, and thermal resilience.
Medical device housings and non-implantable components where biocompatibility (ISO 10993-5 tested) is required.
Consumer electronics enclosures needing EMI shielding support and long-term dimensional stability.
| Chemical Type | High-consistency silicone rubber (HCR), platinum-cured |
| Product Form | Uncured gum stock in standard slabs or rolls |
| Appearance | Off-white to light tan, uniform elastomeric sheet |
| Hardness (Shore A, ASTM D2240) | 40 ± 2 |
| Tensile Strength (ASTM D412) | ≥ 6.0 MPa |
| Elongation at Break (ASTM D412) | ≥ 450 % |
| Compression Set (22 h @ 175 °C, ASTM D395 Method B) | ≤ 25 % |
| Primary Applications | Sealing, insulation, and structural elastomeric components |
Contact With Us:
E-mail: wangxingqiang@ericwchem.com
Have a Questions? Call Us:
Add:
Building A1, Jiete Industrial Park, Huangpu District, Guangzhou City, Guangdong Province, China
