English
Español
tiếng việt
русский
High-temperature stability up to 200 °C for extended service life in demanding thermal environments.
Excellent compression set resistance, maintaining sealing integrity after prolonged deformation.
Good processability with low viscosity and consistent flow behavior for efficient injection molding and extrusion.
UL 94 HB flame-retardant rating for enhanced safety compliance in electrical and electronic applications.
Low volatility and minimal extractables, supporting ISO 10993 biocompatibility screening suitability.
Automotive under-hood gaskets and vibration-damping mounts.
Consumer electronics seals and protective housings for portable devices.
Industrial fluid-handling components, including diaphragms and valve seats.
Medical device enclosures and non-invasive wearable sensor interfaces.
LED lighting encapsulation and thermal interface pads requiring long-term reliability.
| Chemical Type | Platinum-cured high-consistency silicone rubber (HCR) |
| Product Form | Two-part compound (Part A: base polymer + filler; Part B: platinum catalyst) |
| Appearance | Opaque off-white to light beige gum stock |
| Hardness (Shore A, ASTM D2240) | 60 ± 2 |
| Tensile Strength (ASTM D412) | 7.5 MPa minimum |
| Elongation at Break (ASTM D412) | 350% minimum |
| Specific Gravity (ASTM D297) | 1.15–1.20 |
| Curing System | Pt-catalyzed addition cure (no by-products) |
Contact With Us:
E-mail: wangxingqiang@ericwchem.com
Have a Questions? Call Us:
Add:
Building A1, Jiete Industrial Park, Huangpu District, Guangzhou City, Guangdong Province, China
