English
Español
tiếng việt
русский
Two-part addition-cure liquid silicone rubber system with excellent flowability and low viscosity for precise mold filling.
High thermal stability and long-term reliability over a wide operating temperature range (–60 °C to +200 °C).
Low compression set and outstanding elasticity retention after prolonged thermal aging.
Excellent electrical insulation properties with high dielectric strength and volume resistivity.
Meets UL 94 V-0 flammability rating and complies with RoHS and REACH directives.
High-voltage insulators and encapsulation for power electronics modules.
Sealing and potting of LED drivers, inverters, and EV battery management systems (BMS).
Thermal interface materials (TIM) for heat dissipation in automotive and industrial control units.
Medical device encapsulation requiring biocompatibility support and sterilization resistance.
Flexible gaskets and vibration-damping components in aerospace and rail transportation systems.
| Chemical Type | Platinum-catalyzed addition-cure silicone rubber |
| Product Form | Two-component liquid (Part A: base; Part B: catalyst) |
| Appearance | Part A: translucent viscous liquid; Part B: translucent liquid |
| Mixing Ratio (A:B) | 10:1 by weight |
| Cure Temperature | 100–150 °C (2–30 minutes, depending on thickness) |
| Shore A Hardness (cured) | 50 ± 3 |
| Tensile Strength | 7.0 MPa (ASTM D412) |
| Elongation at Break | 250% (ASTM D412) |
Contact With Us:
E-mail: wangxingqiang@ericwchem.com
Have a Questions? Call Us:
Add:
Building A1, Jiete Industrial Park, Huangpu District, Guangzhou City, Guangdong Province, China
