English
Español
tiếng việt
русский
Two-part addition-cure silicone system with excellent storage stability and long pot life.
Low viscosity before curing, enabling easy mixing, degassing, and mold filling for complex geometries.
High thermal stability and consistent mechanical properties over a wide temperature range (–60 °C to +200 °C).
Excellent electrical insulation performance with low dielectric loss and high volume resistivity.
Minimal shrinkage and outstanding dimensional stability after heat curing.
Encapsulation and potting of electronic components including sensors, PCBs, and power modules.
Manufacturing of high-reliability gaskets and seals for automotive engine control units and EV battery systems.
Prototyping and low-volume production of precision silicone parts via soft-tooling and vacuum casting.
Insulating coatings and protective layers for LED lighting assemblies and photovoltaic connectors.
Medical device components requiring biocompatibility-compliant materials (ISO 10993 tested formulations available upon request).
| Chemical Type | Platinum-catalyzed addition-cure silicone rubber |
| Product Form | Two-component liquid (Part A: base polymer + filler; Part B: crosslinker + catalyst) |
| Appearance (Uncured) | Part A: translucent off-white viscous liquid; Part B: translucent colorless to pale yellow liquid |
| Mixing Ratio (A:B by weight) | 10:1 |
| Cure Conditions | 25 °C × 24 h or 80 °C × 30 min |
| Hardness (Shore A, cured) | 55 ± 5 |
| Tensile Strength (cured) | ≥ 5.0 MPa |
| Elongation at Break (cured) | ≥ 200 % |
Contact With Us:
E-mail: wangxingqiang@ericwchem.com
Have a Questions? Call Us:
Add:
Building A1, Jiete Industrial Park, Huangpu District, Guangzhou City, Guangdong Province, China
