English
Español
tiếng việt
русский
Two-part, platinum-catalyzed addition-cure silicone rubber system offering excellent dimensional stability after curing.
Low viscosity before cure enables easy mixing, degassing, and precise mold filling for complex geometries.
Exceptional thermal resistance with continuous service temperature up to 200 °C and short-term peak tolerance to 250 °C.
Outstanding electrical insulation properties and low dielectric loss across wide frequency and temperature ranges.
Meets UL 94 V-0 flammability rating when properly formulated and cured, supporting safety-critical applications.
High-reliability encapsulation of power electronics, including IGBT modules and EV inverter components.
Thermal interface materials (TIMs) for heat dissipation in LED lighting systems and semiconductor packaging.
Sealing and potting of sensors and control units in automotive under-hood environments.
Insulating layers and protective coatings for medical device components requiring biocompatibility support.
Flexible bonding and cushioning elements in renewable energy systems such as solar inverters and wind turbine controllers.
| Chemical Type | Platinum-catalyzed addition-cure silicone elastomer |
| Product Form | Two-component liquid system (Part A: base polymer + filler; Part B: crosslinker + catalyst) |
| Appearance (Uncured) | Part A: translucent viscous liquid; Part B: translucent low-viscosity liquid |
| Mixing Ratio (A:B by weight) | 10:1 |
| Cure Conditions | 150 °C for 10 minutes or 100 °C for 60 minutes |
| Hardness (Shore A, ASTM D2240) | 50 ± 5 |
| Tensile Strength (ASTM D412) | ≥ 6.0 MPa |
| Elongation at Break (ASTM D412) | ≥ 200 % |
Contact With Us:
E-mail: wangxingqiang@ericwchem.com
Have a Questions? Call Us:
Add:
Building A1, Jiete Industrial Park, Huangpu District, Guangzhou City, Guangdong Province, China
