English
Español
tiếng việt
русский
Two-part addition-cure liquid silicone rubber system with excellent mixing ratio tolerance (A:B = 1:1 by weight).
Low viscosity and outstanding flowability for precise filling of fine-detailed molds and complex geometries.
Fast room-temperature or elevated-temperature curing with minimal shrinkage and no by-products.
Exceptional thermal stability, maintaining mechanical integrity from –50 °C to +200 °C after full cure.
Excellent electrical insulation properties and UL 94 V-0 flammability rating (per cured sample).
Medical device encapsulation and sealing components requiring ISO 10993 biocompatibility compliance.
Automotive sensors, ignition boots, and ECU potting where vibration resistance and thermal cycling durability are critical.
LED lighting optics and secondary optical elements due to high transparency and UV stability.
Consumer electronics gaskets, keypads, and soft-touch overmolding for enhanced tactile performance and environmental sealing.
| Chemical Type | Addition-cure platinum-catalyzed silicone rubber |
| Product Form | Two-component liquid (Part A and Part B) |
| Appearance (Uncured) | Part A: Translucent colorless liquid; Part B: Translucent colorless liquid |
| Mixing Ratio (by weight) | 1:1 (A:B) |
| Cure Condition (Standard) | 25 °C × 24 h or 100 °C × 10 min |
| Hardness (Shore A, ASTM D2240) | 40 ± 2 |
| Tensile Strength (ASTM D412) | ≥ 5.0 MPa |
| Elongation at Break (ASTM D412) | ≥ 350 % |
Contact With Us:
E-mail: wangxingqiang@ericwchem.com
Have a Questions? Call Us:
Add:
Building A1, Jiete Industrial Park, Huangpu District, Guangzhou City, Guangdong Province, China
