English
Español
tiếng việt
русский
Two-part, addition-cure liquid silicone rubber system offering excellent processability and low viscosity for easy mixing and degassing.
High thermal stability with continuous service temperature up to 180 °C and short-term resistance to 200 °C.
Outstanding electrical insulation properties and low dielectric loss across wide frequency and temperature ranges.
Excellent compression set resistance and long-term elasticity retention after prolonged heat aging.
UL 94 V-0 rated flame retardancy without halogen additives, supporting RoHS and REACH compliance.
High-voltage insulators and bushings for power transmission equipment.
Sealing and encapsulation of automotive electronic control units (ECUs) and sensors.
Thermal interface materials (TIMs) for LED lighting modules and power electronics.
Flexible gaskets and sealing components in industrial automation and renewable energy inverters.
Medical device housings requiring biocompatibility support (ISO 10993 tested per formulation).
| Chemical Type | Platinum-catalyzed addition-cure silicone elastomer |
| Product Form | Two-component liquid (Part A: base polymer + filler; Part B: crosslinker + catalyst) |
| Appearance | Part A: translucent off-white liquid; Part B: translucent pale yellow liquid |
| Mixing Ratio (A:B) | 10:1 by weight |
| Shore A Hardness (cured, 7 days @ 25 °C + 2 hrs @ 150 °C) | 60 ± 2 |
| Tensile Strength (ASTM D412) | 8.5 MPa min |
| Elongation at Break (ASTM D412) | 280% min |
| Density (ASTM D792) | 1.18 g/cm³ |
Contact With Us:
E-mail: wangxingqiang@ericwchem.com
Have a Questions? Call Us:
Add:
Building A1, Jiete Industrial Park, Huangpu District, Guangzhou City, Guangdong Province, China
