English
Español
tiếng việt
русский
Two-part addition-cure liquid silicone rubber system with excellent flowability and low viscosity for precise mold filling.
High thermal stability and long-term reliability over extended service life at elevated temperatures.
Low compression set and outstanding elasticity retention after repeated mechanical stress.
Excellent electrical insulation properties with stable dielectric performance across wide temperature and frequency ranges.
Platinum-catalyzed formulation ensuring consistent cure behavior, minimal by-products, and high biocompatibility compliance (ISO 10993 compatible).
Medical device encapsulation and sealing components requiring USP Class VI and ISO 10993 certification.
Automotive sensors, gaskets, and protective housings exposed to under-hood thermal cycling.
Consumer electronics potting and conformal coating for high-reliability circuit protection.
Industrial automation parts including flexible membranes, diaphragms, and precision seals.
LED lighting encapsulants where optical clarity, UV resistance, and thermal management are critical.
| Chemical Type | Platinum-catalyzed addition-cure liquid silicone rubber |
| Product Form | Two-component (Part A: base polymer; Part B: catalyst) |
| Appearance | Part A: translucent viscous liquid; Part B: translucent liquid |
| Mixing Ratio (A:B) by Weight | 10:1 |
| Cure Conditions | 25°C × 24 h or 80°C × 10 min |
| Hardness (Shore A, ASTM D2240) | 30 ± 2 |
| Tensile Strength (ASTM D412) | ≥ 6.0 MPa |
| Elongation at Break (ASTM D412) | ≥ 250 % |
Contact With Us:
E-mail: wangxingqiang@ericwchem.com
Have a Questions? Call Us:
Add:
Building A1, Jiete Industrial Park, Huangpu District, Guangzhou City, Guangdong Province, China
