English
Español
tiếng việt
русский
Two-part, addition-cure liquid silicone rubber with excellent flowability and low viscosity for precise mold filling.
High thermal stability and consistent performance across a wide operating temperature range (–60 °C to +200 °C).
UL 94 V-0 rated flame retardancy without halogen additives, supporting stringent safety requirements.
Low compression set and outstanding elasticity retention after prolonged thermal aging.
Excellent electrical insulation properties and dielectric strength suitable for high-reliability electronic encapsulation.
Encapsulation and potting of power electronics, including IGBT modules and EV onboard chargers.
Sealing and gasketing in automotive under-hood components exposed to high heat and vibration.
Insulating layers and protective coatings for LED lighting assemblies and driver circuits.
Medical device housing seals requiring biocompatibility-compliant materials (ISO 10993 tested).
Industrial sensors and transducers requiring long-term dimensional stability and environmental resistance.
| Chemical Type | Platinum-catalyzed addition-cure silicone rubber |
| Product Form | Two-component liquid (Part A + Part B) |
| Appearance | Transparent to translucent viscous liquid |
| Mixing Ratio (A:B) | 1:1 by weight |
| Cure Temperature | 100–150 °C (accelerated) or room temperature with extended time |
| Shore A Hardness (Cured) | 50 ± 3 |
| Tensile Strength | 8.0 MPa (typical, ASTM D412) |
| Volume Resistivity | >1 × 10¹⁵ Ω·cm (ASTM D257) |
Contact With Us:
E-mail: wangxingqiang@ericwchem.com
Have a Questions? Call Us:
Add:
Building A1, Jiete Industrial Park, Huangpu District, Guangzhou City, Guangdong Province, China
