English
Español
tiếng việt
русский
High tear strength and excellent elongation at break for demanding dynamic applications.
Fast room-temperature vulcanization (RTV) with low exotherm, enabling efficient processing without ovens.
Outstanding thermal stability from –60 °C to +200 °C long-term, with short-term resistance up to +250 °C.
Excellent electrical insulation properties and low dielectric loss across wide frequency and temperature ranges.
Good adhesion to common substrates including metals, glass, and plastics without primers in many cases.
Electrical encapsulation and potting of power electronics, transformers, and LED drivers.
Sealing and gasketing in automotive under-hood components exposed to heat and vibration.
Protective coatings for sensors and control units in industrial automation systems.
Insulating layers in renewable energy equipment, including solar inverters and wind turbine controllers.
Medical device housings requiring biocompatibility-compliant materials (ISO 10993 tested).
| Chemical Type | Platinum-cured addition-cure silicone rubber |
| Product Form | Two-component liquid system (Part A: base, Part B: catalyst) |
| Appearance | Translucent, low-viscosity liquid (Part A); colorless to pale yellow liquid (Part B) |
| Mix Ratio (by weight) | 10 : 1 (A:B) |
| Cure Time (23 °C / 50% RH) | Surface dry in ~30 min; full cure in 24 h |
| Hardness (Shore A, cured) | 70 ± 3 |
| Tensile Strength (cured) | 8.0 MPa (typical) |
| Elongation at Break (cured) | 220% (typical) |
Contact With Us:
E-mail: wangxingqiang@ericwchem.com
Have a Questions? Call Us:
Add:
Building A1, Jiete Industrial Park, Huangpu District, Guangzhou City, Guangdong Province, China
