English
Español
tiếng việt
русский
Non-ionic, low-foaming formulation designed for rapid static charge dissipation on hard floor surfaces.
pH-neutral (pH 6.8–7.2) to ensure compatibility with epoxy, vinyl, and polished concrete flooring systems.
Residue-free evaporation leaves no tacky film or particulate buildup after cleaning.
Contains proprietary anti-static agents compliant with ANSI/ESD S20.20 and IEC 61340-5-1 standards.
Low-VOC (<15 g/L), meeting U.S. EPA and EU REACH VOC limits for industrial maintenance products.
Cleanroom floors in semiconductor fabrication facilities (Class 100–10,000 environments).
Electronics assembly areas requiring ESD-safe surface maintenance without grounding dependency.
Pharmaceutical manufacturing suites where static-induced particle attraction must be minimized.
Data center raised access floors subject to high foot traffic and sensitive equipment proximity.
Aerospace avionics testing labs requiring non-corrosive, non-outgassing static control.
| Chemical Type | Non-ionic surfactant blend with quaternary ammonium-derived static dissipaters |
| Product Form | Liquid concentrate (ready-to-dilute) |
| Appearance | Clear, pale yellow liquid, homogeneous and free of sediment |
| Odor | Faint, non-irritating aliphatic ester note |
| Density (25°C) | 1.02–1.04 g/cm³ |
| Primary Applications | Static control cleaning of conductive, static-dissipative, and insulative hard floors |
| Key Features | ESD-safe, non-corrosive, non-staining, non-yellowing |
| Regulatory Compliance | REACH registered; RoHS 2 Directive compliant; California Prop 65 listed (no reportable substances) |
| Common Compatible Systems | Suitability |
| 3M™ Static Dissipative Vinyl Flooring | Highly Recommended – Maintains surface resistivity (10⁶–10⁹ Ω/sq) without degradation |
| Shaw Industries ESD Epoxy Coatings | Recommended – No adverse interaction with amine-cured resin matrices |
| Forbo Marmoleum Conductive Sheet Flooring | Suitable – Verified non-leaching under standard dilution (1:128) |
| Tarkett iQ ESD Rubber Flooring | Highly Recommended – Preserves embedded carbon grid integrity during routine mopping |
Q1: What is the CAS Registry Number for EW-6010/6020?
A: EW-6010 and EW-6020 are proprietary multi-component formulations; individual CAS numbers are not assigned. Full compositional disclosure is available under NDA via Material Disclosure Report (MDR-6010/6020 Rev. C).
Q2: What is the recommended dilution ratio for general maintenance use?
A: For daily static control cleaning, dilute 1 part EW-6010/6020 with 128 parts deionized water (0.78% v/v). Heavy contamination may require up to 1:64 dilution; never use undiluted.
Q3: How does EW-6010/6020 differ from conventional quaternary ammonium disinfectants?
A: Unlike quat-based disinfectants, EW-6010/6020 contains no biocidal actives and is not registered as a pesticide. Its static-dissipative function relies on hygroscopic ionic surfactants—not antimicrobial action—ensuring no interference with ESD flooring conductivity or cleanroom microbial monitoring programs.
Q4: Is there risk of chemical migration or extractables into cleanroom air or process fluids?
A: No measurable volatile organic extractables were detected per ASTM D7973-21 (cleanroom-compatible materials testing). Residue analysis via GC-MS showed <0.05 µg/cm² non-volatile residue post-drying—well below ISO 14644-1 Class 5 airborne molecular contamination (AMC) thresholds.
Q5: Does EW-6010/6020 require special disposal procedures?
A: As a non-hazardous, aqueous-based product (EPA 40 CFR 261.21–261.24 exempt), it may be discharged to sanitary sewer per local pretreatment ordinance. SDS Section 13 provides jurisdiction-specific guidance; no RCRA hazardous waste classification applies.
Contact With Us:
E-mail: wangxingqiang@ericwchem.com
Have a Questions? Call Us:
Add:
Building A1, Jiete Industrial Park, Huangpu District, Guangzhou City, Guangdong Province, China
